How-to
Can You Finance Closing Costs With a Hard Money Loan?
Last Updated: November 17, 2026
Quick Summary
Some hard money lenders will finance part of your closing costs into the loan, but only if the lender agrees and the loan-to-cost cap still leaves room. A hard money loan is short-term and asset-based, so model your cash to close before signing.
- Confirm in writing which closing costs the lender will finance into the loan.
- Recalculate the loan-to-cost cap with closing costs included before assuming they can be rolled in.
- Compare total interest over your holding period, not just cash to close at closing.
- Run one scenario paying costs in cash and one with the lender financing them.
- Review the closing disclosure against your term sheet before signing.
Table of Contents
- How Hard Money Loans Work and What Closing Costs Look Like
- Which Closing Costs Lenders Typically Charge
- Hard Money Loan Requirements That Affect Your Cash to Close
- Using a Hard Money Loan Calculator to Estimate Your Numbers
- Step-by-Step: How to Finance Closing Costs Into Your Loan
- Worked Hard Money Loan Example: Cash to Close Under Two Structures
- Next Step: Request a Written Quote and Review Your Closing Disclosure with Kala Group Capital
- Frequently Asked Questions
How Hard Money Loans Work and What Closing Costs Look Like
Some hard money lenders will finance part of your closing costs, but only if the lender agrees and your numbers still work. Model this before you sign, so you know your cash to close before you commit. Hard money loans are short-term loans secured by the property itself, and they are used most often for fix and flip projects.
A hard money loan is a short-term, asset-based loan that funds a real estate purchase or renovation. The lender looks mainly at the property's value and your plan for it, not just your tax returns. Terms are commonly one year or less, though the exact length depends on the lender.
Closing costs are the fees you pay to complete the loan and the property transfer (Loan estimate explainer). On a hard money loan, these usually include lender charges plus third-party fees. For a breakdown of the origination and other lender fees you will actually pay on a fix and flip loan, see Fix and Flip Loan Origination Fees: What You'll Actually Pay. Together they can add up to a meaningful share of the loan amount, so it pays to ask for a full breakdown early.
Your key question is how much cash you must bring to the table. This is your cash to close, and it equals your down payment plus your closing costs, minus any amount the lender covers. Financing closing costs reduces that figure, but it also raises your loan balance.
Which Closing Costs Lenders Typically Charge
Hard money lenders charge a mix of lender fees and third-party costs. Each one affects your total, so review them line by line.
Common lender-side charges include:
- Origination fee: A percentage of the loan, often charged as points. One point equals 1% of the loan amount (How should I use lender credits and points (also called discount points)?).
- Underwriting or processing fee: A flat charge for reviewing the file.
- Prepaid interest: Interest collected at closing for the first part of the loan term.
- Document or servicing fees: Charges for preparing and managing loan paperwork.
Third-party costs are paid to outside providers. They often include:
- Appraisal fee: Pays for the property valuation the lender relies on.
- Title search and title insurance: Confirms clear ownership and protects against past claims.
- Escrow fee: Pays the company that holds and disburses funds.
- Recording fee: Charged by the county to record the new deed or mortgage.
Fees vary by lender and by transaction. Ask each lender for a written quote so you can compare the same items side by side.
Hard Money Loan Requirements That Affect Your Cash to Close
Lender requirements shape how much of your closing costs can be financed. Two ratios matter most. Loan-to-value (LTV) compares the loan to the property's current value (What is a loan-to-value ratio and how does it relate to my costs?). Loan-to-cost (LTC) compares the loan to the total project cost, including purchase price and rehab costs. Many lenders also use an after-repair value (ARV) to size the loan.
A lower LTV or LTC limit means you bring more cash. Some lenders will not finance closing costs at all, while others allow them within the loan-to-cost cap. Read the limit carefully, because a loan that covers closing costs may still leave you short on rehab funds.
Lenders also review your experience, your exit plan, and your cash reserves. Strong reserves can help you negotiate terms, including whether closing costs can be rolled in.
Using a Hard Money Loan Calculator to Estimate Your Numbers
A hard money loan calculator helps you test scenarios before you request a quote. Enter the purchase price, rehab budget, loan amount, origination points, interest rate, loan term, and estimated third-party fees. For a method to calculate closing costs on a flipping loan to plug into your own numbers, see How to Calculate Closing Costs for House Flipping Loans. The calculator then shows your monthly interest, total closing costs, and cash to close.
Run at least two versions: one where you pay closing costs out of pocket, and one where the lender finances them. Compare the cash you bring in each case, then compare the total interest you pay over the term. To see how financed closing costs change your return on the project, read How to Calculate ROI on a Fix and Flip Project. The cheaper cash-to-close option is not always the cheaper loan.
Keep your inputs realistic. Use the lender's stated points and your own estimate for appraisal and title. Update the numbers once you get a written loan estimate.
Step-by-Step: How to Finance Closing Costs Into Your Loan
Most guides explain what closing costs are but stop short of showing how to actually get a lender to include them in the loan. The process below is the practical sequence experienced investors use.

Step 1: Ask the eligibility question before you ask for a quote. When you first speak with a loan officer, ask directly: "Which closing costs can be financed into the loan, and which must be paid in cash?" Lenders typically split fees into three buckets: lender origination and points (often financeable within the loan-to-cost cap), third-party costs like appraisal and title (sometimes financeable, sometimes required as cash at closing), and prepaid items like interest and insurance reserves (usually cash). Get the answer in writing, not verbally.
Step 2: Request a written term sheet and a line-item fee schedule. A term sheet should state the maximum loan amount, the LTV and LTC caps, the origination points, the interest rate, the minimum interest period, and whether closing costs count toward the cap.
Step 3: Recalculate the loan-to-cost cap with closing costs included. This is where most borrowers get surprised. If the lender caps the loan at 85% of total project cost, and your total project cost (purchase + rehab + closing costs) is $265,000, the maximum loan is $225,250.
Step 4: Structure the request in the loan application. On the application or term sheet request, specify the loan amount you need and note that it includes eligible closing costs. Before you request a quote, review the Fix-and-Flip Loan Documents: Complete Checklist so you know what to gather for the application.
Step 5: Compare the cash-to-close and the total cost side by side. Build a simple two-column comparison: one column for paying costs in cash, one for financing them.
Step 6: Confirm the final numbers on the closing disclosure. Before signing, compare the closing disclosure to the term sheet and fee schedule. Check that the financed amount matches what was agreed, that no new fees appeared, and that the cash-to-close figure matches your model.
Watch out: a verbal "we can probably roll that in" is not an approval. If the financed amount is not documented on the term sheet and reflected on the closing disclosure, plan to bring the cash.
Worked Hard Money Loan Example: Cash to Close Under Two Structures
The example below uses round numbers for illustration only. Assume a purchase price of $200,000, a rehab budget of $50,000, estimated closing costs of $15,000, an origination fee of 2 points, a 12% interest rate, a 12-month term, and a lender that caps the loan at 85% of total project cost (LTC).
Structure A: You pay closing costs in cash. The lender funds 80% of the purchase price ($160,000) and 90% of rehab ($45,000), for a total loan of $205,000. Your cash to close is the $40,000 down payment plus $15,000 in closing costs, or $55,000.
Structure B: The lender finances eligible closing costs. Assume the lender allows origination points and some third-party fees to be rolled in, but the LTC cap still applies. Total project cost is $265,000 ($200,000 + $50,000 + $15,000). At 85% LTC, the maximum loan is $225,250.
Structure C: The LTC cap binds. Now assume the same deal but the lender caps LTC at 80%. Total project cost is still $265,000, so the maximum loan is $212,000.
Fee-by-fee review before you sign. When you receive the loan estimate or closing disclosure, walk through each line and classify it:
- Lender charges: origination points, underwriting, processing, document prep, and servicing. These are the most likely to be financeable, but confirm in writing.
- Third-party charges: appraisal, title search, title insurance, escrow, and recording. Some lenders finance these; many require cash at closing.
- Prepaid items: prepaid interest, insurance reserves, and tax reserves. These are almost always cash.
- Negotiable items: some lenders will reduce origination points or waive processing fees for repeat borrowers or larger loans. Ask.
Questions to ask each lender for an apples-to-apples comparison. Ask for the origination points, the interest rate, the minimum interest period (often 3 to 6 months), any extension fees, the maximum LTV and LTC, whether closing costs count toward the cap, which specific fees are financeable, and the total cash to close. Put the answers in a spreadsheet with one column per lender so you can compare the same items side by side.
Watch out: the cheapest cash-to-close option is rarely the cheapest loan. Always compare total interest over your expected holding period, not just the check you write at closing.
The table below summarises the figures from the worked example so you can compare the two structures at a glance.
| Item | Structure A (pay costs in cash) | Structure B (lender finances eligible costs) |
|---|---|---|
| Cash to close | $55,000 | $40,000 |
| Loan balance | $205,000 | $220,000 |
| Monthly interest | Roughly $2,050 | Roughly $2,200 |
| Total interest over 12 months | About $24,600 | About $26,400 |
| Closing costs assumed | $15,000 | $15,000 |
Structure A (pay costs in cash)
Next Step: Request a Written Quote and Review Your Closing Disclosure with Kala Group Capital
Financing closing costs with a hard money loan is possible when the lender allows it and your ratios hold up. Get a written quote, run both structures, and compare the total cost, not just the cash at closing. Pricing depends on loan size, property, and timing; check Kala Group Capital's website for current terms or a quote. Kala Group Capital offers an easy online platform and preliminary term sheets in under 5 minutes, so you can check your numbers quickly. Apply Here to start your review.
Frequently Asked Questions
Can you finance closing costs into a hard money loan?
Some hard money lenders will include certain closing costs in the loan amount, but it is not guaranteed. Whether it is possible depends on the lender's policies, the loan-to-value limit, and the property's after-repair value. Costs such as origination fees and some third-party charges are the most common candidates. Ask for the policy in writing before you assume the costs can be rolled in, and confirm the final numbers on your closing disclosure.
What closing costs do hard money lenders charge?
Hard money lenders commonly charge origination fees, often quoted as points, along with prepaid interest, appraisal, title search and insurance, escrow, and recording fees. Lender-specific charges such as underwriting or processing fees may also appear. Amounts vary by lender, loan size, and state. Compare each line item on a written loan estimate rather than relying on a single rate quote.
What are the downsides of financing closing costs with a hard money loan?
Rolling closing costs into the loan increases your principal, which means more interest accrues over the loan term and your monthly payment or payoff amount grows. It can also reduce the equity cushion the lender relies on, which may lower the loan amount approved or trigger stricter terms. If the project runs long, the higher balance adds pressure on your exit. Model the total cost before agreeing to finance fees.
How does financing closing costs affect the loan-to-value ratio?
Loan-to-value compares the loan amount to the property's appraised or after-repair value. When closing costs are added to the loan, the loan amount rises even though the property value stays the same, so the ratio goes up. Many hard money lenders cap LTV, so financing closing costs may reduce the amount you can borrow or push the deal past their limit. Ask the lender to show the LTV with and without the added costs.